Royal Technology provides polymer coating service and coating equipment for waterproof coatings with Parylene nano film. Parylene coating technology is widely used in aerospace, precious relics, silicone rubber, seals, magnetic materials, MEMS, circuit boards, sensors, biomedical and other fields. Parylene-coated product can increase the strength and temperature insulation, abrasion proof, chemical resistance (diluted chemical), corrosion-resistant. Our equipment are presently being used by many large enterprises all over the world.
What is parylene?
It is a transparent and colorless polyester protective material. It is suitable for vacuum coating at room temperature, and the vacuum coating pressure is below 10-5 Torr, while the Parylene coating process is about 0.1 Torr. The thickness of the coating can be controlled between 1-100 microns. The coating is a patent developed by the United States in the early 1960s. It was first applied to the field of microelectronic components for US military printed circuit boards, aerospace and underwater launch devices, 1972 Included in the U.S. military standards in:
MIL-I-46058C
Micro and nano processing technology: chemical vapor deposition (CVD)
Put the powdered nano-materials into the evaporation chamber of the vacuum nano-coating equipment, and evaporate into gaseous molecules at a temperature of 150℃-180℃. Under the action of vacuum (1.0*10-2torr), the gaseous nanomolecules below 10nm enter into the cracking In the cracking chamber, the high temperature at 680°C-700°C is cracked into reactive monomers, and the active monomers and monomers are re-polymerized to form a dense and pinhole-free nano-film layer.
Applications:
1.Circuit board coating
2.Magnetic Materials
Before Parylene is used, some (coating) wear centers can easily lose the insulation of magnetic windings. Parylene can not only overcome this defect, but also form a friction-resistant inner surface, which can accelerate the elongation and winding process, and at the same time increase ferrite The dielectric properties and high-voltage resistance of magnetic materials such as body can overcome the defects of non-abrasion resistance and acid resistance after ordinary epoxy resin spraying and hanging processes.
3. Medical Instruments:
4. LED outdoor lighting
5. Silicone Rubber Use
6. Sensors
7.Historical Rlics, Fragile cultural relics, specimens, etc. can be reinforced and protected with Parylene to extend their life.
Technical Specifications
Active Volume of the Cavity: ⌀750*930mm
Floor Space: 3250*2000*2630mm
Total power:10kw
Technical advantages
Parylene Coating Characteristics
Good moisture-proof and waterproof effect can withstand salt spray
Ultra-thin insulation layer can withstand high voltage
No deflation suitable for space and aerospace applications
Comply with U.S. military standard MIL I-46058C
Bio-compatibility meets FDA (Class VI)
Good dry lubricity
Strong penetration can penetrate into the bottom of SMD devices
Fix surface debris to prevent particle contamination and dust proof effect
Mass rolling coating reduces costs
Optically transparent
Can resist acid and alkali corrosion
Can resist low temperature (-200 ~ 450 ℃)
Moth-proof and mildew-proof, suitable for protection of cultural relics
Parylene nano coating can achieve complete, continuous and pinhole-free
Please contact us for more specifications, Royal Technology is honored to provide you total coating solutions.