Parylene is an excellent three-proof material, its protective effect is better than silicone resin, epoxy resin and polyurethane.
In recent years, coating Parylene on the surface of sensors has become a trend.
The protection of sensors by Parylene In addition to insulation protection, it is more used as a protection material for harsh environments.
Parylene coating is resistant to acids, alkalis and organic solvents, and has excellent barrier protection against harsh environments such as water vapor and salt spray. The ultra-thin characteristic of Parylene coating will not change the appearance, size, elasticity, weight, etc.
Parylene Coatings Main Applications:
1.Circuit board coating
3. Medical Instruments:
4. LED outdoor lighting
5. Silicone Rubber Use
Sensors protected by Parylene coating include automotive sensors, sensors for corrosive environments, biomedical sensors, acoustic sensors, biomedical electrodes, implanted sensors, etc.
7.Historical Rlics, Fragile cultural relics, specimens, etc. can be reinforced and protected with Parylene to extend their life.
Parylene Coatings Properties
Good moisture-proof and waterproof effect can withstand salt spray
Ultra-thin insulation layer can withstand high voltage
No deflation suitable for space and aerospace applications
Comply with U.S. military standard MIL I-46058C
Bio-compatibility meets FDA (Class VI)
Good dry lubricity
Strong penetration can penetrate into the bottom of SMD devices
Fix surface debris to prevent particle contamination and dust proof effect
Mass rolling coating reduces costs
Can resist acid and alkali corrosion
Can resist low temperature (-200 ~ 450 ℃)
Moth-proof and mildew-proof, suitable for protection of cultural relics
Parylene nano coating can achieve complete, continuous and pinhole-free
One touch automatically coating process
PLC control system, full color touch screen man-machine dialogue interface,
automatically adjust the evaporation speed, ensure the uniformity of deposition pressure.
Two sets of cylinder device, easy to place the product before coating, without hand handling.
Vacuum Roots pump is equipped to accelerate pumping speed and improve coating efficiency.
Large capacity of coating chamber, suitable for mass production and large size products, reduce coating cost.
Active Volume of the Cavity: ⌀800*800mm
Floor Space: 3050*1900*1680mm
Please contact us for more specifications, Royal Technology is honored to provide you total coating solutions.