PMMA Automotive Logo Billboard Chroming Machine, Car LOGOs and Signs Vacuum Coating Equipment
Aluminum Thermal Evaporation Coating System
Summary: The RTEP6638 resistance evaporation coating equipment is a cube chamber model for PVD Chrome metalizing system was customized designed and manufactured for Car LOGO board reflection film deposition.
Max. Size substrate: Diameter 5500mm, depth: <300mm.
Capacity: 2 pieces for max. Size product; 4~12 pieces depends on dimensions.
About Thermal Evaporation Filament Technology: It Introducing the work pieces into the vacuum chamber, when the chamber's vacuum pressure is up to 5.0*10-2～8.0×10-3Pa with different stage of vacuum pumps ( Rotary Piston Vacuum Pump, Rotary Vane Pump, Roots Vacuum Pump,Diffusion Pump) , and then evaporate the Chrome filaments which hold in the tungsten filament ( or board). When the work pieces are turning around in a rotary driving system, the chrome material would deposit on the substrates surface and generate a highly uniform coating layer.
Finishing Properties: PVD chrome on PMMA (Acrylic) surface, which generates the outstanding coating layers as below: During the day time, sign symbols look like solid metal ( stainless steel effect); while at night, they are illuminated ( LED light inside is installed ) from front, back and side views.
Built Time: 2014 ~ 2015
1. Ultimate Vacuum Pressure: better than 5.0×10-6 Torr.
2. Operating Vacuum Pressure: 1.0×10-4 Torr.
3. Pumping down Time: from 1 atm to 1.0×10-4 Torr≤3 minutes ( room temperature, dry, clean and empty chamber)
4. Metalizing material ( evaporation): Al, Cr, Sn, Ti, SS, Cu… etc.
5. Operating Model: Full Automatically /Semi-Auto/ Manually
The vacuum coating machine contains key completed system listed below:
1. Vacuum Chamber
1.1 Size: Inner Length: 6600mm
Inner Height: 3800mm
Inner Width: 1300mm
1.2 Material: Vacuum Chamber: SS41 mild steel
Door and flanges: SS41 mild steel
Chamber strengthen structure: SS41 mild steel, with painted finishing surface treatment.
Chamber chassis SS41 mild steel with painted finishing surface treatment.
1.3 Evaporation Shield : SUS304
1.4 View Window: on chamber door
1.5 Vacuum Chamber Venting Valve (including silencer)
1.6 Door: SS41 mild steel
2. Roughing Vacuum Pumping System (Backing Pump Package)
3. High Vacuum Pumping System (Diffusion Pump + Cold trap device)
4. Electrical Control and Operation System- PLC+ Touch Screen
4.1 Main circuit: None-fuse breaker switch, electromagnetic switch, C/T in series type
4.2 Evaporation Power
4.3 Evaporation Control System
4.4 Operation System: Touch Screen + PLC, recipe control and data logging, Auto shutdown, auto evacuation, auto coating
4.5 Vacuum Pressure Measuring System
Vacuum Gauge: Pirani + Penning gauge
Thermocouple Gauge: 760 Torr ~ 5*10-4 Torr
4.6 Alarm System: Compressed air pressure , Cooling water flow, Mis-operation
4.7 Power Load Indicator: Voltage indicator and load current indicator
5. Deposition System
5.1 Tungsten filament evaporation source
5.2 Cr/Al wires
6.1 Air Compressed Valve Control System
6.2 Cooling Water System:Water flow pipe and switch valve system
6.3 Polycold (-120~-145℃) Brooks Cryopump for option.
7. Working Environment
Compressed Air: 5~8kg/cm2
Cooling Water: Water-In Temperature: 20~25℃, 200 Liter/min,
Water-In Pressure: 2~3 kg/cm2,
Power: 3 Phase 380V 50Hz(60Hz), 300kVA
Installation Area: (L*W*H) 15000*6800*4800mm
Exhaust: Vent for mechanical pumps
Cleaning Room is highly recommended
Royal technology has developed and built the whole supplies chains for Car LOGO board PVD metalizing service. From mold design & manufacturing, thermal vacuum forming process, UV curing base/top coatings; PVD chroming metalizing till LED lighting assemble, we are able to provide the turnkey coating solutions.